Fast Foot Marine Foot Throttle
Metal Lubricants & Cleaners
JackPlate Mount Essentials
1/2'' Diameter Bolt Kits for Jackplates (Compatible with all models except minis!)
3/8'' Diameter Bolt kits for Mini JackPlates (JPL2410SB, JPL2412SB, JPL2710SB, JPL2712SB
Transom Plates & Mounting Templates
Drop Down Plate
Hydraulic Kick-Up JackPlates
Manual Kick-Up JackPlates
0 - 20 Horse Power
0 - 40 Horse Power
0 - 150 Horse Power
0 - 225 Horse Power
0 - 300 Horse Power
0 - 400 Horse Power
Why a JackPlate?
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
HYJP6000 5'' Setback Hydraulic "Smooth Series" Boat Jackplate
Quantity in Stock:97
Usually Ships in 24 Hours
Hard Black Anodzied
Marine Silicone for Installation:
10.1 Oz Tube Marine Silicone [Add $16.49]
2.8 Oz Marine Silicone [Add $10.29]
No, I don't need Marine Silicone
Mounting Bolts(Engine to JackPlate):
Add 2.5'' stainless kit [Add $11.99]
No, I do not need Mounting Bolts.
Overall Dimensions: 19.5'' x 16'' x 6'' (Lift Plate sits 1 inch inside unit making distance between transom and engine 5'')
6'' of vertical lift
400 HP V8 Maximum HP Rating
Hard-Anodized Black Finish (Salt Water Ready)
Heavy Duty Solenoid Included (Winch Contactor)
Includes 12 feet of wire and switch for operation
Easy Installation, hydraulic pump and reservoir are self contained inside of the jackplate
Lifetime Warranty on Frame
1 year hydraulic pump warranty from pump manufacturer
Weighs 68 pounds
Proudly machined and assembled at our own factory in TENNESSEE, U.S.A.!
Made of high strength polished Aircraft Quality Aluminum
Offers 6 inches of adjustable Vertical movement
5 inches of setback
Weighs 68 lbs
400 Maximum Horsepower
JackPlates are the perfect solution for long shaft engines with a short shaft transom!
Here are the pre-drilled hole dimensions listed below in inches:
Pre-drilled holes for 1/2'' stainless hardware
12 7/8'' across the top two holes from center to center
9 7/8'' across the bottom two holes from center to center
8'' of vertical distance between the top holes and bottom mounting holes
If your holes do not match this configuration, you can drill into the aluminum plate. However, by modifying the unit returns will not be accepted.
We manufacture all of our JackPlates on our own equipment at our facility in Taft, TN!
If you have any questions please feel free to email or call us, we want to help you. If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!
Share your knowledge of this product.
Be the first to write a review »