Home > Shop/View Products > Kick-Up Jack Plates > Manual Kick-Up Jack Plates >

Vance JPL9650 GEN/3 6'' Setback "Kick-Up Plate"

Vance JPL9650 GEN/3 6'' Setback "Kick-Up Plate"

Alternative Views:

Our Price: $362.59

Quantity in Stock:69
Availability:: Usually Ships in 24 Hours
Product Code: JPL9650GEN3

Clamp-On Engine Bracket Adapter:

Finish Type:

Transom Plates Inside Braces:

Mounting Bolts(JackPlate & Transom):

Mounting Bolts(Engine to JackPlate):

Marine Silicone for Installation:

Dimensions: 13'' Height, 6'' Setback, 1/2'' Thick Aluminum

45 Degree Angle of Kick-Up ability

Total weight: 24 pounds

Simply the best idea ever for the adventurous sportsman! This plate allows access to the previously unreachable fishing or hunting ground with a standard tiller engine without worries of prop damage.

Here's how it works:

The jack plate is designed to swivel on the rugged stainless steel shaft in case of an obstacle such as a stump or rock while carefully trolling back to the hotspots your buddies can't reach!

Simply tighten the side swivels to desired setting for your rig size and you are protected from a potential lower unit or prop BOO-BOO! Also included are two safety cables to prevent over-travel swiveling of engine when an obstruction is encountered.

Tightness is determined by engine reverse requirement. The larger the engine, the tighter the swivels for preventing flip-up during reverse.

This is the only Kick-Up plate manufactured by any manufacturer that has vertical travel similar to a jackplate as well as the kick up function limited by stainless steel chain in the event of hitting a log, stump or earth below.

No springs to break and no replacement parts necessary as the JPL9650 is made of aircraft quality aluminum and 3/8 stainless steel chain, grade 316.

This unit is compatible with clamp on engines by adding the accessory star-board plate. If you have a clamp-on engine that is not standard BIA Bolt pattern and wish to use this unit, in the options tab add the star-board plate for clamp on engines and it will come installed on the unit so you can use your clamps and have a solid mounting surface. The starboard plate adds 5 more pounds to the weight of the item. The plate is made from marine grade plastic that is resistant to freezing, corrosion, and rot. It is 1 inch thick and spans across the entire mounting surface so that you have plenty of room to mount your engine.

Trailer Your boat:

Locking pins and similar are not necessary for your Vance Manufacturing Kick-Up unit to trailer your boat. Click Here for more information and instructions on how to your boat with your new Vance Manufacturing Kick-Up Plate.

Here are the pre-drilled hole dimensions listed below in inches for standard outboard engines:

  • Pre-drilled holes for 1/2'' stainless hardware
  • 12 7/8'' across the top two holes from center to center
  • 9 7/8'' across the bottom two holes from center to center
  • 8'' of vertical distance between the top holes and bottom mounting holes

If your holes do not match this configuration, you can drill into the aluminum plate. However, by modifying the unit returns will not be accepted.

If you have any questions please feel free to email or call us. If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!

We sell world-wide, give our units a try and put them to work for you!

From everyone at Vance Manufacturing, thank you for looking and we look forward to serving you!!

WARNING: The JPL9650 Gen/3 is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. The JPL9650 Gen/3 is not designed to encounter obstructions while the boat is being operated in the reverse direction.

Not sure what size Bolt Kit you need to mount your Vance kick-up plate to your boat transom? Click here to use our kick-up bolt kit calculator.

Not sure what the Vance Transom Plate Inside Braces are? Click here for more info.

CMC Breakaway, jackplate, jack plate, bobs machine, breakaway plate, motor saver, Vance Manufacturing, CMC Breakaway plate, Breakaway Jackplate

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Great Product August 16, 2020
Reviewer: Zac CAROTHERS from Oxford , MS United States  
Was exactly what I needed! Easy installation and they mailed same day I ordered got it the next day will definitely buy another for my other boats.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Gen3/6 kick plate May 17, 2020
Reviewer: Ronnie Wilkerson from Monette, AR United States  
Haven't installed waiting on motor tech support is awesome and fast shipping will by another product from them

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 JPL9650 GEN/3 6" setback kick up plate March 29, 2020
Reviewer: Joel Thompson from Albemarle , NC United States  
Vance jpl9650 kick plate is heavy duty built. I am very impressed with the quality of the construction of the product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 very fast shipment/great quality November 20, 2019
Reviewer: Anthony causey from Citronelle, AL United States  
I ordered my breakaway and transom wedges @ 9am on a Friday and they were at my front steps @5pm on Saturday. Great customer service!! all my question were answered before I placed my order. Everything was packaged great and seems to be built with high quality materials. Bolted up to my boat like it should can't wait to get it on the water this weekend to try it out! Highly recommend this company!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great! September 3, 2019
Reviewer: Haydn Scallon from Sherwood, AR United States  
Great Product and top notch quality!

Was this review helpful to you?