Home > Shop/View Products > Jack Plates > Manual Jack Plates > 0 - 40 Horse Power >

JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines

JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines


 
Alternative Views:


Our Price: $197.99

Quantity in Stock:59
Availability:: Usually Ships in 24 Hours
Product Code: JPL2412SB


Finish Type:


Marine Silicone for Installation:


Qty:  
Description
 
The JPL2412SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on style engine designs. It is capable of vertically lifting outboard 3” with an offset of 5” from transom. The engine side is 2'' higher than the transom so you can get a total of 5'' of lift if you lift the unit's adjustment to Maximum height. If you want to stay the same height when you install, simply mount the unit a little lower on your transom. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 12”x 8” with a 1-1/4” thick clamping surface for all clamp on style outboard engines. With a weight of only 13 lbs the JPL2412SB is capable of handling 0 to 40 HP motors. If your engine is the standard bolt pattern, this unit will not work for your engine.

Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:

  • Pre-drilled holes for 1/2'' stainless hardware
  • 12 7/8'' across the top two holes from center to center
  • 9 7/8'' across the bottom two holes from center to center
  • 8'' of vertical distance between the top holes and bottom mounting holes

The JPL2412SB is constructed of high-strength aircraft quality aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Product! August 13, 2019
Reviewer: Mark Romsey from Ponce De Leon, FL United States  
Well made jack plate, was really surprised at how fast it shipped. Ordered around lunch on a Thursday and received it the very next day. Couldn't be happier about the purchase!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome mini jack plate! August 6, 2019
Reviewer: kevin walsh from jupiter, FL United States  
Great quality construction and finish!
Simple installation, very sturdy!
More than happy, I will be spreading the good word!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to install August 3, 2019
Reviewer: Gerry Suner from Linwood, NJ United States  
I have a 16 ft. V hull aluminum boat with a long shaft 25hp outboard motor which is a little long for my boat.  This mini- jack plate enables me to raise the motor up to about 5”. It’s nicely made of aluminum.  I had to drill holes in the boat  for the bolts & nuts (not included) It’s durable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mini Jack Plate July 31, 2019
Reviewer: Mark from Ocala, FL United States  
Very well made and simple to adjust .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product June 25, 2019
Reviewer: Tyler McDonald from Florence, MS United States  
American made products is the only way to go. Thank you

Was this review helpful to you?

View All Customer Reviews