Home > Shop/View Products > Jack Plates > Manual Jack Plates > 0 - 40 Horse Power >

JPL2712SB 7'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines

JPL2712SB 7'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines


 
Alternative Views:


Our Price: $219.99

Quantity in Stock:87
Availability:: Usually Ships in 24 Hours
Product Code: JPL2712SB


Finish Type:


Marine Silicone for Installation:


Qty:  
Description
 
The JPL2712SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on engine designs. It is capable of vertically lifting outboard 3” with an offset of 7” from transom. The engine side of the jack plate is 2'' higher than the transom so you can achieve a 5'' lift overall at maximum height if you adjust the unit all the way up. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 12”x 8” with a 1-1/4” thick clamping surface for all clamp on style outboard engines. With a weight of only 14 lbs the JPL2712SB is capable of handling engines up to 40 HP.

The JPL2712SB is constructed of high-strength aircraft quality anodized aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.


If you have any questions please feel free to message or call us, that information is listed on our website.
If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!

If your engine is the standard bolt pattern, this unit will not work for your engine.

Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:

  • Pre-drilled holes for 1/2'' stainless hardware
  • 12 7/8'' across the top two holes from center to center
  • 9 7/8'' across the bottom two holes from center to center
  • 8'' of vertical distance between the top holes and bottom mounting holes

We sell world-wide, give our units a try and put them to work for you!

From everyone at Vance Manufacturing, thank you for looking and we look forward to serving you!!

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Ventilation problem solved - 100% satisfied July 21, 2019
Reviewer: Thomas Beller from Pavia - ITALY  
On my 6 mt jon with a Honda 20 hp (by far too small, due to local limitations) this jack plate solved all my prop ventilation problems.
100% satisfied.

Was this review helpful to you?