Dimensions: 18'' Height, 6'' Setback, 1/2'' Thick Aluminum
45 Degree Angle Kick-Up Capable
Total weight: 55 pounds
Simply the best idea ever for the adventurous sportsman! This plate
allows access to the previously unreachable fishing or hunting ground
with a standard tiller engine without worries of prop damage.
Here's how it works:
The jack plate is designed to swivel on the rugged stainless steel shaft in case of an obstacle such as a stump or rock while carefully trolling back to the hotspots your buddies can't reach!
Simply tighten the side swivels to desired setting for your rig size and you are protected from a potential lower unit or prop BOO-BOO! Also included are two safety chains to prevent over-travel swiveling of engine when an obstruction is encountered.
Tightness is determined by engine reverse requirement. The larger the engine, the tighter the swivels for preventing flip-up during reverse.
It is also equipped with 6 inches of hydraulic vertical lift just like a regular hydraulic jack plate. This unit enables you to have the kick-up and hydraulic vertical lift function in one compact 6 inch setback design!
The hydraulic pump is self contained and mounted in the jack plate so there are no hydraulic lines or reservoirs that need to be checked or maintained. The pump is manufactured by Parker Hannifin right here in the United States and includes a 1 year manufacturer defect warranty. Vance Manufacturing will handle all claims and replacements regarding Parker Hannifin Pumps directly within the 1 year warranty period.
This unit comes with all electrical hardware needed to mount and operate unless wire extension is desired beyond 10 feet. 10 feet of cable is included with every HYDKU6500. A heavy duty winch contactor solenoid and two way switch come standard with this model for easy operation, attach your wires going to the battery and your unit is ready to function. No assembly needed period.
Aluminum Structure Anodizing available for prolonged life, the first picture shown is clear anodized. Hard Black Anodized is available, the model number for it is HYDKU6500HBA. Hard Black Anodized is recommended for salt water and brackish water applications.
This is the only Kick-Up plate manufactured by any manufacturer that has adjustable hydraulic vertical lift (jack plate) as well as the kick up function limited by stainless steel chain in the event of hitting a log, stump or earth below.
No springs to break and no replacement parts necessary as the HYDKU6500 is made of aircraft quality aluminum and 3/8 stainless steel chain, grade 316.
Here are the pre-drilled hole dimensions listed below in inches for standard outboard engines:
Pre-drilled holes for 1/2'' stainless hardware
12 7/8'' across the top two holes from center to center
9 7/8'' across the bottom two holes from center to center
8'' of vertical distance between the top holes and bottom mounting holes
If your holes do not match this configuration, you can drill into the aluminum plate. However, by modifying the unit returns will not be accepted.
The HYDKU6500 unit structure has a limited lifetime warranty against manufacturer defects. The hydraulic pump and electrical wiring have a 1 year warranty period against manufacturer defects. Contact us if you are having any issues, we want to help you!
If you have any questions please feel free to email or call us at 1.931.425.6820. If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!
Trailer Your boat:
Locking pins and similar are not necessary for your Vance Manufacturing Kick-Up unit to trailer your boat. Click Here for more information and instructions on how to your boat with your new Vance Manufacturing Kick-Up Plate.
Not sure what size Bolt Kit you need to mount your Vance Hydraulic Kick-Up to your boat transom? Click here to use our Hydraulic Kick-Up bolt kit calculator.
Not sure what the Vance Transom Plate Inside Braces are? Click here for more info.
Not sure which Vance Coating option to choose? Click here for more info.
WARNING: The HYDUKU-6500 is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H. and only in the forward direction. The HYDKU6500 is not designed to encounter obstructions while the boat is being operated in the reverse direction.
U.S. Patent No. 10,343,756
CMC Breakaway, jackplate, jack plate, bobs machine, breakaway plate, motor saver, Vance Manufacturing, CMC Breakaway plate, Breakaway Jackplate
0 - 150 HP Engines.