Vance JPL2712SB 7'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines


Usually Ships in 24 Hours
$305.11 - $445.11
(4 reviews)
Current Stock:
Adding to cart… The item has been added
The JPL2712SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on engine designs. It is capable of vertically lifting outboard 3” with an offset of 7” from transom. The engine side of the jack plate is 2'' higher than the transom so you can achieve a 5'' lift overall at maximum height if you adjust the unit all the way up. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 12” Wide x 8” Length with a 1-1/4” thick clamping surface for all clamp on style outboard engines. With a weight of only 14 lbs the JPL2712SB is capable of handling engines up to 40 HP.
The JPL2712SB is constructed of high-strength aircraft quality aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.

If you have any questions please feel free to message or call us, that information is listed on our website. If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!

If your engine is the standard bolt pattern, this unit will not work for your engine.

Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:

  • Pre-drilled holes for 1/2'' stainless hardware
  • 12 7/8'' across the top two holes from center to center
  • 9 7/8'' across the bottom two holes from center to center
  • 8'' of vertical distance between the top holes and bottom mounting holes

We sell world-wide, give our units a try and put them to work for you!

From everyone at Vance Manufacturing, thank you for looking and we look forward to serving you!!

Not sure what size thickness clamping plate you need? Measure the minimum distance your outboard engine will clamp and then round up to the nearest inch so you have enough for clamping your engine onto your new Vance Mini Jack Plate. We offer these units with 1 inch, 2 inch, and 3 inch thick mounting plates.

Not sure what size Bolt Kit you need to mount your Vance mini jack plate to your boat transom? Click here to use our mini jack plate bolt kit calculator.

Not sure what a Vance mini transom plate is? Click here for more info.

Not sure which Vance Coating option to choose? Click here for more info.
0 - 40 hp Engines.


  • 5
    7" setback plate with Yamaha 25

    Posted by Chris Shoemaker on 8th Nov 2021

    I had a few questions regarding fitment of my engine (98 Yamaha 25 2 stroke) onto my 16' boat and addressing some ventilation problems after rebuilding my transom. Vance helped me throughout the entire process of picking out a jack plate (I really wanted the 5" but they insisted that Yamaha users had issues with it due to clamp bolt length so I went with the 7"). I got it installed and after a few trips I was able to get the height perfectly dialed for situations where I'm by myself or with my kids and then I found the best all around setting and I couldn't be happier. My ONLY suggestion would be to add measurements on the sides where the slide slots are...excellent products, great prices, and insanely good customer service 10/10. Thanks again.

  • 5
    Fast service, beautifully made.

    Posted by Michael Page on 1st Jun 2021

    Super fast delivery and the build quality is beyond compare.

  • 5
    Best of the best

    Posted by andy from south florida on 8th Dec 2020

    Want a jackplate for the gheenoe? Vance is the place. Where else would a company suggest a prospective customer call prior to ordering on-line to make sure the customer is ordering the correct item? Where else can a prospective customer talk to the folks that design and manufacture the jackplate? Where else would a prospective customer know his motor is more suited to a 7", not 5" jackplate offset? VANCE, VANCE, VANCE! Amazingly helpful. THEN comes the install. Pretty straight forward 30 minutes, ross perot measure twice drill once, and the deal is strong and secure....THEN comes the performance.....adjustable 5" up/down is a great range for an F25 Yamaha and man it makes a difference on running skinny, speed and better hole-shot...As you can tell more than satisfied and restores out faith in the great people of TN and buying American!!!!!!!!!!

  • 5
    Ventilation problem solved - 100% satisfied

    Posted by Thomas Beller on 21st Jul 2019

    On my 6 mt jon with a Honda 20 hp (by far too small, due to local limitations) this jack plate solved all my prop ventilation problems. 100% satisfied.