Vance JPL9638 Gen/3 6'' Setback "Kick-Up Plate"

SKU:
JPL9638G3

Availability:
Usually Ships in 24 Hours
NT$15,590.13 - NT$18,188.54
(9 reviews)
Current Stock:
Adding to cart… The item has been added
Dimensions: 13'' Height, 6'' Setback, 3/8'' Thick
Total weight: 21 pounds

45 Degree Angle of Kick-Up ability

Simply the best idea ever for the adventurous sportsman! This plate allows access to the previously unreachable fishing or hunting ground with a standard tiller engine without worries of prop damage.

Here's how it works:

The jack plate is designed to swivel on the rugged stainless steel shaft in case of an obstacle such as a stump or rock while carefully trolling back to the hotspots your buddies can't reach!

Simply tighten the side swivels to desired setting for your rig size and you are protected from a potential lower unit or prop BOO-BOO! Also included are two safety cables to prevent overtravel swiveling of engine when an obstruction is encountered.

Tightness is determined by engine reverse requirement. The larger the engine, the tighter the swivels for preventing flip-up during reverse.

This is the only Kick-Up plate manufactured by any manufacturer that has vertical travel similar to a jack plate as well as the kick up function in the case of hitting a log, stump or earth below.

No springs to break and no replacement parts necessary as the JPL9638 is made of aircraft quality aluminum and 3/8 stainless steel chain, grade 316!

Proudly manufactured and assembled
100% in the USA

CLAMP ON ENGINES:
This unit is compatible with clamp on engines by adding the accessory star-board plate. If you have a clamp-on engine that is not standard BIA Bolt pattern and wish to use this unit, in the options tab add the star-board plate for clamp on engines and it will come installed on the unit so you can use your clamps and have a solid mounting surface. The starboard plate adds 5 more pounds to the weight of the item. The plate is made from marine grade plastic that is resistant to freezing, corrosion, and rot. It is 1 inch thick and spans across the entire mounting surface so that you have plenty of room to mount your engine.

Trailer Your boat:


Locking pins and similar are not necessary for your Vance Manufacturing Kick-Up unit to trailer your boat. Click Here for more information and instructions on how to your boat with your new Vance Manufacturing Kick-Up Plate.

WARNING: The JPL9638 Gen/3 is rated for outboard motors up to a maximum of 60 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. The JPL9638 Gen/3 is not designed to encounter obstructions while the boat is being operated in the reverse direction.

Not sure what size Bolt Kit you need to mount your Vance kick-up plate to your boat transom? Click here to use our kick-up bolt kit calculator.

Not sure what the Vance Transom Plate Inside Braces are? Click here for more info.

Not sure which Vance Coating option to choose? Click here for more info.
0 - 60 HP Engines

Reviews

  • 5
    -

    Posted by Jerry Taylor on 16th Aug 2021

    Amazing product and service!

  • 5
    Customer service

    Posted by Jonathan Gossett on 15th Jun 2021

    They have the best customer service I’ve seen in a long time. Edward called me back very quickly and answered all my questions thoroughly.

  • 5
    Really Well Made

    Posted by Scott on 12th Apr 2021

    Great Product, Really Well Made, Fast Shipping. Light on Documentation but very easy to get assistance via phone or e-mail. Would definitely buy from Vance again and highly recommend them to others.

  • 5
    -

    Posted by Chuck Kellar on 4th Apr 2021

  • 5
    -

    Posted by Jon Dock on 12th Jan 2021

    this is my 4th or 5th product from you, great quality, fast shipping. i wont look at any other brand

  • 5
    Vance JPL9650

    Posted by Jim on 24th Nov 2020

    Product is high quality and works as advertised, much better design than the competitor's product. A+

  • 5
    Vance "Kick-Up Plate"

    Posted by STEPHEN PRICE on 24th Jun 2020

    I ordered my "Kick-Up Plate" on a Friday and received it Saturday. Very well made product and best of all it s Made in the USA!!

  • 5
    Money well spent !!!!

    Posted by Edward Michalowski on 11th Jun 2020

    Easy to install was in the water in less than an hour used on creek with lots of trees and stumps hit a few worked perfect no lower unit damage paid for itself already .

  • 5
    -

    Posted by Matthew Avinger on 4th Jan 2020

    Great quality product and fast service.