Vance JPL9650 GEN/3 6'' Setback "Kick-Up Plate"

SKU:
JPL9650G3

Availability:
Usually Ships in 24 Hours
৳60,364.79 - ৳69,419.69
(8 reviews)
Current Stock:
Adding to cart… The item has been added
Dimensions: 13'' Height, 6'' Setback, 1/2'' Thick Aluminum

45 Degree Angle of Kick-Up ability

Total weight: 24 pounds

Simply the best idea ever for the adventurous sportsman! This plate allows access to the previously unreachable fishing or hunting ground with a standard tiller engine without worries of prop damage.

Here's how it works:

The jack plate is designed to swivel on the rugged stainless steel shaft in case of an obstacle such as a stump or rock while carefully trolling back to the hotspots your buddies can't reach!

Simply tighten the side swivels to desired setting for your rig size and you are protected from a potential lower unit or prop BOO-BOO! Also included are two safety cables to prevent over-travel swiveling of engine when an obstruction is encountered.

Tightness is determined by engine reverse requirement. The larger the engine, the tighter the swivels for preventing flip-up during reverse.

This is the only Kick-Up plate manufactured by any manufacturer that has vertical travel similar to a jackplate as well as the kick up function limited by stainless steel chain in the event of hitting a log, stump or earth below.

No springs to break and no replacement parts necessary as the JPL9650 is made of aircraft quality aluminum and 3/8 stainless steel chain, grade 316.

CLAMP ON ENGINES:
This unit is compatible with clamp on engines by adding the accessory star-board plate. If you have a clamp-on engine that is not standard BIA Bolt pattern and wish to use this unit, in the options tab add the star-board plate for clamp on engines and it will come installed on the unit so you can use your clamps and have a solid mounting surface. The starboard plate adds 5 more pounds to the weight of the item. The plate is made from marine grade plastic that is resistant to freezing, corrosion, and rot. It is 1 inch thick and spans across the entire mounting surface so that you have plenty of room to mount your engine.

Trailer Your boat:

Locking pins and similar are not necessary for your Vance Manufacturing Kick-Up unit to trailer your boat. Click Here for more information and instructions on how to your boat with your new Vance Manufacturing Kick-Up Plate.


Here are the pre-drilled hole dimensions listed below in inches for standard outboard engines:

  • Pre-drilled holes for 1/2'' stainless hardware
  • 12 7/8'' across the top two holes from center to center
  • 9 7/8'' across the bottom two holes from center to center
  • 8'' of vertical distance between the top holes and bottom mounting holes

If your holes do not match this configuration, you can drill into the aluminum plate. However, by modifying the unit returns will not be accepted.

If you have any questions please feel free to email or call us. If we are not here or the line is busy, leave a message with your contact information and we will get back with you as soon as possible!

We sell world-wide, give our units a try and put them to work for you!

From everyone at Vance Manufacturing, thank you for looking and we look forward to serving you!!

WARNING: The JPL9650 Gen/3 is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. The JPL9650 Gen/3 is not designed to encounter obstructions while the boat is being operated in the reverse direction.

Not sure what size Bolt Kit you need to mount your Vance kick-up plate to your boat transom? Click here to use our kick-up bolt kit calculator.

Not sure what the Vance Transom Plate Inside Braces are? Click here for more info.

Not sure which Vance Coating option to choose? Click here for more info.









CMC Breakaway, jackplate, jack plate, bobs machine, breakaway plate, motor saver, Vance Manufacturing, CMC Breakaway plate, Breakaway Jackplate
0 - 150 HP Engines.

Reviews

  • 5
    Product review

    Posted by craig davis on 12th Jul 2021

    I am very pleased with the quality and price point. Fast shipping and great customer service!

  • 5
    Fast friendly service

    Posted by John Summers on 24th Nov 2020

    Great products great price great people to do business with

  • 2
    Kick plate

    Posted by Julius lovasz on 14th Nov 2020

    Just put this on my 16/48 weld built with 50 Tohatsu straight forward install. but you cannot trim the motor all the way up or it will break off the tiller handle on the transom, also can't trim up enough to get to prop if something gets wrapped around it. the whole purpose of getting this was in case I hit something it would hopefully save the foot, but it will kick up enough to hit the transom also and break the tiller. Plate and motor are mounted as high as possible.

  • 5
    Great Product

    Posted by Zac CAROTHERS on 16th Aug 2020

    Was exactly what I needed! Easy installation and they mailed same day I ordered got it the next day will definitely buy another for my other boats.

  • 5
    Gen3/6 kick plate

    Posted by Ronnie Wilkerson on 17th May 2020

    Haven't installed waiting on motor tech support is awesome and fast shipping will by another product from them

  • 5
    JPL9650 GEN/3 6" setback kick up plate

    Posted by Joel Thompson on 29th Mar 2020

    Vance jpl9650 kick plate is heavy duty built. I am very impressed with the quality of the construction of the product.

  • 5
    very fast shipment/great quality

    Posted by Anthony causey on 20th Nov 2019

    I ordered my breakaway and transom wedges @ 9am on a Friday and they were at my front steps @5pm on Saturday. Great customer service!! all my question were answered before I placed my order. Everything was packaged great and seems to be built with high quality materials. Bolted up to my boat like it should can't wait to get it on the water this weekend to try it out! Highly recommend this company!

  • 5
    Great!

    Posted by Haydn Scallon on 3rd Sep 2019

    Great Product and top notch quality!